- Product description
-
Product description
Protection set with remote signalling, lightning and surge arrester type 1+2
• Arresting capacity 100 kA 10/350 µs, BET tested
• Pre-mounted and ready for connection, incl. connecting bridges, labelled connection terminals
• With remote signalling and potential-free changeover contact for function monitoring
• For use in TN-S and TT network systems
Note: Max. backup fuse (required only if not already fitted in network) 125 A gL/gG
- Technical data
-
Technical data
Conductor cross-section, rigid (single-wire/multiwire), max. 50 mm² Dimension 255V Follow current quenching capacity (eff) [N-PE] 25 kA Lightning protection zone LPZ 0→2 Lightning surge current (10/350 μs) 50 kA Lightning surge current (10/350) 100 kA Maximum back-up fuse 125 A Maximum continuous voltage (L-N) 255 V Maximum continuous voltage (N-PE) 255 V Maximum continuous voltage AC 255 Maximum discharge current (8/20 μs) 100 kA Nominal discharge current (8/20 µs) 100 kA Nominal voltage AC (50/60 Hz) 230 V Operating temperature, max. 80 °C Operating temperature, min. -40 °C Pole version 3+N/PE Protection rating IP20 Remote signalling yes Response time <25 ns Short-circuit resistance 25 kA Signalling on device Visual SPD to EN 61643-11 Type 1+2 SPD to IEC 61643-1 Class I+II Version for 3+1-pole with FS; 255 V Connectivity options
Arrester surge current (8/20 µs) [total] 100 kA Conductor cross-section, rigid (single-wire/multiwire), min. 10 mm² Max. mains-side overcurrent protection 125 Short-circuit resistance for max. mains-side overcurrent protection 25 kA - All types
- Downloads
-
Data sheet PS4-B+C FS / 5089611 , 0.40MB , pdfCatalogue Überspannungsschutz , 28.42MB , pdfSelection aid Selection aid, surge protection , 2.00MB , pdf
United Arab Emirates - English