Technical data
| Blow-out |
no
|
| Cable type for surge protection devices |
Power cable AV
|
| Conductor cross-section, flexible (fine-wire), min. |
2,5
mm²
|
| Conductor cross-section, rigid (single-wire/multiwire), max. |
2,5
mm²
|
| Dimension |
12V AC
|
| Explosion-tested version |
no
|
| Installation type |
DIN rail 35 mm
|
| Lightning protection zone LPZ |
2→3
|
| Maximum back-up fuse |
20
A
|
| Maximum continuous voltage AC |
13,5
|
| Maximum continuous voltage DC |
18
|
| Maximum discharge current (8/20 μs) |
2
kA
|
| Network form |
Other
|
| Nominal discharge current (8/20 µs) |
0,7
kA
|
| Nominal voltage AC (50/60 Hz) |
12
V
|
| OBO_Nominal load current (input/output terminal) |
20
A
|
| Operating temperature, max. |
80
°C
|
| Operating temperature, min. |
-40
°C
|
| Pole number |
3
|
| Pole version |
2
|
| Protection level wire-earth |
<1200
V
|
| Protection level wire-wire |
<110
V
|
| Protection rating |
IP20
|
| Remote signalling |
no
|
| Response time |
<25
ns
|
| Signalling on device |
Visual
|
| SPD to EN 61643-11 |
Type 3
|
| SPD to IEC 61643-1 |
Class III
|
| Test class, type 3 |
yes
|
| Version for |
12 V version
|
Connectivity options
| Conductor cross-section, rigid (single-wire/multiwire), min. |
0,14
mm²
|
| Max. mains-side overcurrent protection |
20
|
