CombiController V25, plug-in arrester 385 V

Item no. 5097063 | EAN 4012195030669

1
IP20
Product description

Product description

Combination arrester – type 1+2 • Plug-in arrester can be separated from base without tools and current cut-off in base• Including thermal and dynamic cut-off unit and visual fault display • High current conductivity and long service life
  • MAGYAR ELEKTROTECHNIKAI ELLENŐRZŐ INTÉZET Budapest, Hungary
  • Russia, GOST The State Committee for Standards
  • 5-year warranty
  • Communautés Européennes, EC declaration of conformity according to EC directives
  • EurAsian Conformity
  • Combination protection device made of type 1 and type 2
  • Transition from LPZ 0 to LPZ 2
Technical data

Technical data

Blow-out no
Conductor cross-section, rigid (single-wire/multiwire), max. 35 mm²
Dimension 385V
Installation type On basic element
Lightning protection zone LPZ 0→2
Lightning surge current (10/350 μs) 7 kA
Lightning surge current (10/350) 7 kA
Maximum back-up fuse 160 A
Maximum continuous voltage AC 385
Maximum continuous voltage DC 505
Network form Other
Nominal discharge current (8/20 µs) 30 kA
Nominal voltage AC (50/60 Hz) 350 V
Operating temperature, max. 80 °C
Operating temperature, min. -40 °C
Pole version 1
Protection rating IP20
Response time <25 ns
Signalling on device Visual
SPD to EN 61643-11 Type 1+2
SPD to IEC 61643-1 Class I+II
Version for 1-pole

Connectivity options

Arrester surge current (8/20 µs) [total] 30 kA
Conductor cross-section, rigid (single-wire/multiwire), min. 2,5 mm²
Max. mains-side overcurrent protection 160
All types

All types

Types Pole version Maximum continuous voltage AC Protection rating Item no. Quantity SSU
V25B 0 SO-280 1 280 IP20 5097055
30 piece
V25B 0 SO-385 1 385 IP20 5097057
30 piece
V25-B+C 0-385 1 385 IP20 5097063
30 piece
V25-B+C 0-150 1 150 IP20 5097088
1 piece
Downloads

Download

Download
Download
Download

Download
Download

No invitation to tender text is available for this product.