VG housing with MC 50-B/3+1
Item no. 5089200 | EAN 4012195531012
| Item no. / Types |
5089200 / VG 4-B TNS+TT
|
|---|
- Product description
-
Product description
Lightning arrester system solution type 1 according to DIN EN 61643-11.• LightningController MC 50-B/VDE and MC 125-B/NPE mounted in insulating housing IP 65, sealable housing
• Pulse current 100 kA (10/350 µs), BET-tested
• Conforms to requirements of VDE-AR-N 4100
• Protection level < 2.0 kV
• Encapsulated, non-extinguishing discharge gap
• Suitable for TN-S and TT network systems
Application example: The system solution is used in the pre-meter area according to VDE-AR-N 4100.
- Technical data
-
Technical data
Blow-out no Conductor cross-section, rigid (single-wire/multiwire), max. 50 mm² Dimension 280V Follow current quenching capacity (eff) [N-PE] 25 kA Installation type Pre-mounted in the housing Lightning protection zone LPZ 0→1 Lightning surge current (10/350 μs) 50 kA Lightning surge current (10/350) 125 kA Maximum back-up fuse 500 A Maximum continuous voltage AC 255 Network form Other Nominal discharge current (8/20 µs) 50 kA Nominal voltage AC (50/60 Hz) 230 V Operating temperature, max. 85 °C Operating temperature, min. -40 °C Pole version 3+N/PE Protection rating IP54 Remote signalling no Response time <100 ns Short-circuit resistance 25 kA Signalling on device None SPD to EN 61643-11 Type 1 SPD to IEC 61643-1 Class I Test class, type 1 yes TN network form yes TN-C-S network form yes TN-S network form yes TT network form yes Version for 3-pole with NPE; 255 V Connectivity options
Arrester surge current (8/20 µs) [total] 125 kA Conductor cross-section, rigid (single-wire/multiwire), min. 10 mm² Max. mains-side overcurrent protection 500 Short-circuit resistance for max. mains-side overcurrent protection 25 kA - All types
- Downloads
-
Data sheet VG 4-B TNS+TT / 5089200 , 0.27MB , pdfNo invitation to tender text is available for this product.