Junction box T 40, plug-in seal, flame-resistant

Item no. 2007320 | EAN 4012195286493

  • Protection rating IP 55
  • Verband der Elektrotechnik, Elektronik, Informationstechnik e.V., Germany
  • Communautés Européennes, EC declaration of conformity according to EC directives
  • UV-resistant
  • M25 entry
  • KEMA-KEUR, Netherlands
  • Halogen-free; without chlorine, fluorine and bromine
  • Flame resistant 960 °C
  • Nominal cross-section 4 mm²
  • 7 cable entries
  • Nail device
  • Nominal voltage 500 V
  • IK Code 07

All the T series junction boxes are UV-resistant. They are made of a thermoplastic polypropylene plastic with plug-in seals made of ethylene vinyl acetate (EVA). This plastic is soft, which means that it is malleable. This allows installation of cables through the 7 x M25 seals, or the seals can be cut with a knife at the pre-marked points, in order to create an insertion opening for cables or pipes. Alternatively, instead of seals, cable glands can be inserted through the openings and be countered internally with a locknut.
The junction boxes can be mounted on mounting plates in the openings on the floor using self-tapping screws 3.5 x 9.5.
Clear internal dimensions: 77x77x46 mm

Clear internal dimensions: 77x77x46 mm

Protection rating IP55; Protection rating IK code IK07.

All types

All types

Types Colour Version Entries Clear
Item no. Quantity SSU
T 40 F Light grey; RAL 7035 960 °C flame-resistant 7 x M25 77x77x46 mm 2007320
5 piece
Junction box T 40, plug-in seal, flame-resistant
Junction box T 40, plug-in seal, flame-resistant

Junction box T 40, plug-in seal, flame-resistant

Item no. 2007320

Data sheet, 0.16MB, pdf

Technical data

Expandable yes
No. of entries 7
Type of entry Cable
Type of entry Plug-in seal
Type of housing penetration Cuttable stepped membrane
Version 960 °C flame-resistant
Appendix document 634451 (tserie.pdf); 634124 (harte_typen.pdf)
Measured insulation voltage Vi 500 V
Equipment Without
Cover Not transparent
Cover fastening Locking
Entries 7 x M25
Entry from rear yes
Explosion-tested version no
Flame resistant flame resistant to VDE 0471/DIN 695 Part 2-1, test temperature 960° C
Shape Square
Function maintenance (ETIM) Without
For Ex zone Without
For Ex zone gas Without
For Ex zone dust Without
Fibre-glass reinforced no
With screening no
with lid With locking lid
With cover yes
Installation type Wall/ceiling mounting
Mounting type Wall/ceiling mounting
Nominal cross section 4 mm²
Nominal voltage 500 V
Protection rating IP55
Protection rating IP55
Protection rating IK code IK07.
Sealable no
max. permitted ambient temperature -5 - 60 °C
Transparent lid no
Material description Polypropylene
Weatherproof no


Length 90 mm
Width 90 mm
Height 52 mm
Clear internal dimensions 77x77x46 mm
Invitation to tender text

Invitation to tender text

T 40 F / 2007320

Data sheet

T 40 F / 2007320, 0.16MB, pdf

Catalogues & Flyers

T series junction boxes, 5.42MB, pdf
OBO Aquasit cold casting compound with IP68 protection rating, 0.27MB, pdf
Overview of junction boxes, 3.72MB, pdf

Declarations of conformity