Junction box T 250, plug-in seal, terminal strip

Item no. 2007444 | EAN 4012195682196

  • Protection rating IP 66
  • Halogen-free; without chlorine, fluorine and bromine
  • Verband der Elektrotechnik, Elektronik, Informationstechnik e.V., Germany
  • Communautés Européennes, EC declaration of conformity according to EC directives
  • Flame resistant 650 °C
  • M25 entry
  • KEMA-KEUR, Netherlands
  • M32 entry
  • Nominal cross-section 25 mm²
  • 16 cable entries
  • Nominal voltage 500 V
  • UV-resistant
  • IK Code 05

All the T series junction boxes are UV-resistant. They are made of a thermoplastic polypropylene plastic with plug-in seals made of ethylene vinyl acetate (EVA). This plastic is soft, which means that it is malleable. This allows installation of cables through the 9 x M25
7 x M32 seals, or the seals can be cut with a knife at the pre-marked points, in order to create an insertion opening for cables or pipes. Alternatively, instead of seals, cable glands can be inserted through the openings and be countered internally with a locknut.
The junction boxes can be mounted on mounting plates in the openings on the floor using steel bolts 3.5 x 9.5.
Clear internal dimensions: 225x173x86 mm
Cover with labelling panel and lead-sealed.

Terminal strips and mounting rail are not pre-installed

Clear internal dimensions: 225x173x86 mm

Protection rating IP66; Protection rating IK code IK05.

All types

All types

Types Colour Version Number
Entries Clear
Item no. Quantity SSU
T 250 KL Light grey; RAL 7035 With terminal strip 5 9 x M25 7 x M32 225x173x86 mm 2007444
1 piece
Junction box T 250, plug-in seal, terminal strip
Junction box T 250, plug-in seal, terminal strip

Junction box T 250, plug-in seal, terminal strip

Item no. 2007444

Data sheet, 0.22MB, pdf

Technical data

Expandable yes
No. of entries 16
Number of terminals 5
Type of entry Cable
Type of entry Plug-in seal
Type of housing penetration Cuttable stepped membrane
Version With terminal strip
Appendix document 634451 (tserie.pdf); 634124 (harte_typen.pdf)
Measured insulation voltage Vi 500 V
Equipment Terminal
Cover Not transparent
Cover fastening Screwed
Entries 9 x M25 7 x M32
Entry from rear yes
Explosion-tested version no
Flame resistant Flame resistant to VDE 0471/DIN 695 Part 2-1, test temperature 650 °C
Shape Rectangular
Function maintenance (ETIM) Without
For Ex zone Without
For Ex zone gas Without
For Ex zone dust Without
Fibre-glass reinforced no
Halogen-free yes
With screening no
with lid With four lid quick-release locks
With cover yes
Installation type Wall/ceiling mounting
Mounting type Wall/ceiling mounting
Nominal cross section 25 mm²
Nominal voltage 500 V
Protection rating IP66
Protection rating IP66
Protection rating IK code IK05.
Sealable yes
max. permitted ambient temperature -5 - 60 °C
Transparent lid no
Material description Polypropylene, fibre-glass reinforced
Weatherproof no


Length 240 mm
Width 190 mm
Height 95 mm
Clear internal dimensions 225x173x86 mm
3D data
Invitation to tender text

Invitation to tender text

T 250 KL / 2007444

Data sheet

T 250 KL / 2007444, 0.22MB, pdf

Catalogues & Flyers

T series junction boxes, 5.42MB, pdf
OBO Aquasit cold casting compound with IP68 protection rating, 0.27MB, pdf
Overview of junction boxes, 3.72MB, pdf

Declarations of conformity